Projectors
According to the number of viewers, the light conditions and/or on the parameters of the location we use different types of projectors.
The most important parameters of the projectors are the brightness, size of the lenses and computer resolution. (The success of an event could depend on the chosen equipment!)
We recommend our extra high brightness and high brightness projectors for television productions, fashion shows, conferences, exhibitions, concerts, at sports events (above the playing area or for score boards), and where light conditions require them. Owing to their special set of lenses they provide excellent image quality, even with small or big projection distance than average.
In the case of dual projection mode we use two projectors at the same time, combining the illumination power of which we project a homogeneous image. In this way we can obtain an especially high quality image and adjusting to the actual light conditions, we can even obtain extreme picture size.
We use this method to project onto enormous surfaces, for instance 'wall screen projection', but it is spectacular at fashion shows and at other events that require alternative presentations.
Just as in the case of projector screening the size and quality of the projectable image with this method is also determined by the local light conditions.
PROFESSIONAL DLP PROJECTOR - with a special set of lenses
Christie Roadster S+20K projektor (high performance)
- brightness: 20 000 ANSI lumen
- video signal: DVI-I (HDCP), RGBHV, Composite, S-Video
- computer signal: from VGA to QXGA (max. 2 048 x 1 536)
- native resolution: 1 400 x 1 050
- installation time: approximately 1 hour
- weight: ~73 kg
- installation possibilities: with its built in foot, hanging, or on stand
- power claim: 1 phase, 230 V, 25 A
Christie Roadster S+16K projector (high performance)
- brightness: 16 000 ANSI lumen
- video signal: PAL, PAL M, PAL N, NTSC, NTSC 4.43, SECAM
- computer signal: VGA, SVGA, XGA, SXGA+
- installation time: approximately 1 hour
- weight: 61,2 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 230 V, 20 A
Christie Roadster X6 projector
- brightness: 6 000 ANSI lumen
- video signal: PAL, PAL M, PAL N, NTSC, NTSC 4.43, SECAM
- computer signal: VGA, SVGA, XGA
- installation time: approximately 1 hour
- weight: 41,8 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 220 V, 8,5 A
PROFESSIONAL, LARGE OUTPUT LCD projectors - with a special set of lenses
Christie LX1500 LCD projector
- brightness: 15 000 ANSI Lumen
- video signal: from PAL composite to HDTV 1080i
- computer signal: from VGA to UXGA
- native resolution: 1 024 x 768
- installation time: approx. half an hour
- weight: 36,5 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase; 230 V; 9,7 A
Christie LX120 LCD projector
- brightness: 12 000 ANSI lumen
- video signal: PAL, PAL M, NTSC, SECAM
- computer signal: VGA, SVGA, XGA
- installation time: approximately 1 hour
- weight: 36,5 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 220 V, 16 A
Christie RoadRunner LX1000 projector
- brightness: 10 000 ANSI lumen
- video signal: from PAL composite to HDTV 1080i
- computer signal: from VGA to UXGA
- native resolution: 1 024 x 768
- installation time: approx. half an hour
- weight: 28 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase; 230 V; 5,1 A
Christie RoadRunner LX700 projector
- brightness: 7 000 ANSI Lumen
- video signal: from PAL composite to HDTV 1080i
- computer signal: from VGA to UXGA
- native resolution: 1 024 x 768
- installation time: approx. half an hour
- weight: 11,4 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase; 230 V; 2,3 A
Christie LX66 projector
- brightness: 6 500 ANSI lumen
- video signal: PAL, PAL M, PAL N, NTSC, NTSC 4.43, SECAM
- computer signal: VGA, SVGA, XGA
- installation time: approximately 1 hour
- weight: approximately 24,7 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 220 V, 6 A
Christie L6 projector
- brightness: 5 200 ANSI lumen
- video signal: PAL, PAL M, PAL N, NTSC, NTSC 4.43, SECAM
- computer signal: VGA, SVGA, XGA
- installation time: approximately 1 hour
- weight: 20,5 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 220 V, 6 A
Christie LX500 LCD projector
- brightness: 5 000 ANSI lumen
- video signal: from PAL composit to HDTV 1080i
- computer signal: from VGA to UXGA
- native resolution: XGA
- installation time: approximately half an hour
- weight: 8,7 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 230 V, max. 2,3 A
DATA/VIDEO PROJECTORS - with standard lens
Depending on the number of viewers, the light conditions and/or on the parameters of the location we use a number of different types of projectors.
We recommend our data/video projectors primarily for presentations, demonstrations, exhibitions and projections where the required picture size does not exceed a width of 3-4 metres.
According to the professional equipments, in the case of these projectors – because of the small range of lenses - the option of selecting the projection distance is limited.
Ask for our expert assistance concerning specific equipment and the projection distance belonging to the required picture size.
High brightness
Christie LX55 LCD projector
- brightness: 5 500 ANSI lumen
- video signal: PAL, SECAM, NTSC
- computer signal: VGA, SVGA, XGA
- installation time: approximately half hour
- weight: 7,9 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 220 V, 16 A
Christie L6 projector - with standard lens
- brightness: 5 200 ANSI lumen
- video signal: PAL, PAL M, PAL N, NTSC, NTSC 4.43, SECAM
- computer signal: VGA, SVGA, XGA
- installation time: approximately 1 hour
- weight: 20,5 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 220 V, 6 A
Christie LX500 LCD projector
- brightness: 5 000 ANSI lumen
- video signal: from PAL composit to HDTV 1080i
- computer signal: from VGA to UXGA
- native resolution: XGA
- installation time: approximately half an hour
- weight: 8,7 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 230 V, max. 2,3 A
Normal brightness
Christie LX45 projector
- brightness: 4 500 ANSI lumen
- video signal: PAL, SECAM, NTSC
- computer signal: VGA, SVGA, XGA
- installation time: approximately half an hour
- weight: approximately 8,4 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 220 V, 2,6 A
Low brightness
Hitachi CP-RX80 LCD projector
- brightness: 2.200 ANSI lumen
- video signal: from PAL composite to HDTV 1080i
- computer signal: from VGA to UXGA
- native resolution: 1 024 x 768
- installation time: 10 minutes
- weight: 3,2 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 230 V, 1,5 A
NEC VT660 projector
- brightness: 2 000 ANSI lumen
- video signal: PAL, SECAM, NTSC 4.43
- computer signal: VGA, SVGA, XGA
- installation time: approximately half an hour
- weight: approximately 2,9 kg
- installation possibilities: with its built in foot, hanging, or on stand
- front and rear projection
- power claim: 1 phase, 220 V, 1,7 A
